STM32F767ZIT6 replaced with STM32H753ZIT6?

Welcome, Guest. Please Login or Register.
30. December 2024, 17:06:05

Diskussions- und Newsboard des DARC-Ortsverbandes I40 | allgemeine Kategorie | OVI40 SDR Projekt (English AND German discussions around OVI40 SDR project) (Moderators: DF8OE, DL1PQ) | Topic: STM32F767ZIT6 replaced with STM32H753ZIT6?

<- zurück vorwärts ->

Pages: [1]

Author

Topic: STM32F767ZIT6 replaced with STM32H753ZIT6? (Read 2488 times)

S58J
schon länger dabei

Offline

Posts: 100

Ich liebe dieses Forum!

STM32F767ZIT6 replaced with STM32H753ZIT6?
« on: 04. March 2022, 10:35:23 »

Hi

After four years wait for an RF board I have somehow lost track on UHSDR development. My OVI40 UI/mcHF RF combo currently uses STM32F767ZIT6. And it works just fine. Since the UHSDR firmware development runs in two ways (F7 and H7) is there a significant difference between the two in their current functionalities/capabilities, justifying replacing F7 MCU with H7?

Thank you for your answer in advance.

Kind regards

Janez, S58J

Logged

DF8OE
Administrator

Online

Posts: 6284

Stellvertr. OVV I40, Jugend / Nachwuchsreferent

Re:STM32F767ZIT6 replaced with STM32H753ZIT6?
« Reply #1 on: 04. March 2022, 11:38:34 »

There is no difference in functionality at this moment. Regarding the future H7 has much more horse power then F7 so there may/will be features where H7 horsepower is mandatory for using this features. So if someone publishes his PCB and wants a hint for F7 / H7 my hint is to use H7. It is not much more expensive (if available at all) and is much more future orientated.

At the moment there is a big lack of components availability around many projects - OVI40 included. Some components have "unknown" scheduled delivery time.

73
Andreas

Logged

Wenn der Wind des Wandels weht, nageln die einen Fenster und Türen zu und verbarrikadieren sich. Die anderen gehen nach draußen und bauen Windmühlen...
qrz.com-Seite von DF8OE

-----------------------------------------------------
>>>> Die Inhalte meiner Beiträge dürfen ohne meine explizite Erlaubnis in jedwedem Medium weiterverbreitet werden! <<<<

Pages: [1]

Diskussions- und Newsboard des DARC-Ortsverbandes I40 \| allgemeine Kategorie \| OVI40 SDR Projekt (English AND German discussions around OVI40 SDR project) (Moderators: DF8OE, DL1PQ) \| Topic: STM32F767ZIT6 replaced with STM32H753ZIT6?	<- zurück vorwärts ->

Jump to:

	Es wird die Verwendung von Browsern die auf der "Blink"-Engine basieren und mindestens 1024x768 Pixel Bildschirmauflösung für die beste Darstellung empfohlen
Amateurfunk	Die Beiträge sind, sofern nicht anders vermerkt, unter der folgenden Lizenz veröffentlicht: GNU Free Documentation License 1.3	verbindet!

	Diskussions- und Newsboard des DARC-Ortsverbandes I40 \| Powered by YaBB SE © 2001-2004, YaBB SE Dev Team. All Rights Reserved. - modified by Andreas Richter (DF8OE) Impressum & Disclaimer