Title: STM32F767ZIT6 replaced with STM32H753ZIT6?
Post by: S58J on 04. March 2022, 10:35:23
Hi
After four years wait for an RF board I have somehow lost track on UHSDR development. My OVI40 UI/mcHF RF combo currently uses STM32F767ZIT6. And it works just fine. Since the UHSDR firmware development runs in two ways (F7 and H7) is there a significant difference between the two in their current functionalities/capabilities, justifying replacing F7 MCU with H7?
Thank you for your answer in advance.
Kind regards
Janez, S58J |
Title: Re:STM32F767ZIT6 replaced with STM32H753ZIT6?
Post by: DF8OE on 04. March 2022, 11:38:34
There is no difference in functionality at this moment. Regarding the future H7 has much more horse power then F7 so there may/will be features where H7 horsepower is mandatory for using this features. So if someone publishes his PCB and wants a hint for F7 / H7 my hint is to use H7. It is not much more expensive (if available at all) and is much more future orientated.
At the moment there is a big lack of components availability around many projects - OVI40 included. Some components have "unknown" scheduled delivery time.
73
Andreas |
Diskussions- und Newsboard des DARC-Ortsverbandes I40 | Powered by YaBB SE
© 2001-2003, YaBB SE Dev Team. All Rights Reserved.
|