Title: Start of official Webpages for OVI40-SDR
Post by: DF8OE on 30. September 2017, 14:12:05
I just started the webpages of the project at OVI40-SDR (https://www.amateurfunk-sulingen.de/projects/ovi40-sdr#start). Just click on the British flag for English language...
Of course the pages are not complete and will grow the next time.
Please help me to get best English text! I am sure there are misspellings, bad sentences and so on. If you found something, please send me a PM with the neccessary changes and I will do it ASAP.
vy 73
Andreas |
Title: Re:Start of official Webpages for OVI40
Post by: I2KBD on 30. September 2017, 16:17:53
Great work Andreas!
Alberto I2KBD
|
Title: Re:Start of official Webpages for OVI40-SDR
Post by: DL4HAO_Dietmar on 01. October 2017, 12:07:59
Excellent!
vy73
Dietmar, DL4HAO
|
Title: Re:Start of official Webpages for OVI40-SDR
Post by: AC9QP on 02. October 2017, 17:15:12
Any chance of at least providing a dimensioned drawing of the PCB outline, mounting holes, and inter-board connector locations? It would greatly help with interchangeability for other RF boards.
I've reverse-engineered the center of the mcHF 30-pin is 1.8mm from the top edge and 69mm from the tuner-knob end while the 6-pin on the OVI40 is inline with the 30-pin skipping one 2.54mm pin's space. I'm assuming these are metric grid dimensions rather than imperial as they come out to rounder numbers. |
Title: Re:Start of official Webpages for OVI40-SDR
Post by: DF8OE on 02. October 2017, 17:40:45
Sorry, not at this moment. Please wait until betatest has finished. We do not want to provide informations which are not reliable.
vy 73
Andreas |
Title: Re:Start of official Webpages for OVI40-SDR
Post by: iv3alf on 03. October 2017, 10:45:42
Hi Andreas, I wanted to know if is possible buy the board UI and if solder the new chip has the same difficulty as the chip used in the MCHF
vy 73 IV3ALF Claudio |
Title: Re:Start of official Webpages for OVI40-SDR
Post by: DF8OE on 03. October 2017, 11:30:07
It is a bit more difficult because we use MCU with 144pins instead of 100...
vy 73
Andreas |
Diskussions- und Newsboard des DARC-Ortsverbandes I40 | Powered by YaBB SE
© 2001-2003, YaBB SE Dev Team. All Rights Reserved.
|